1.85mm Phase Stable Low Loss Cable Assembly
Specifications
| Configuration | |
| Connector Series 1 | 1.85mm |
| Connector Gender 1 | Male |
| Connector Angle 1 | Straight |
| Connector Mount Method1 | None |
| Body Materials and Plating 1 | Stainless Steel, Passivated |
| Connector Series 2 | 185mm |
| Connector Gender 2 | Female |
| Connector Angle 2 | Straight |
| Connector Mount Method 2 | None |
| Body Materials and Plating 2 | Stainless Steel, Passivated |
| Cable Type | 3506 |
| Electric Specifications | |
| Impedance | 50 ohm |
| Frequency Range(From DC) | 67GHz |
| VSWR | ≤1.40:1 (DC 0~67GHz) |
| Insertion Loss | Depends on cable length |
| Mechanical Phase | <±10°@67GHz |
| Amplitude Stability | <±0.15dB@67GHz |
| Voltage Rating | 335 V(rms) |
| Dielectric Withstanding Voltage | 500 V |
| Insulation Resistance | ≥500 Mohm |
| Mechanical Characteristics | |
| Mating Cycles | ≥ 500 cycles |
| Mating Torque | 30 in - lbs |
| Environmental Characteristics （RoHS Complliant) | |
| Temperature Rating | -40°C ~ +80°C |
| Corrosion (Salt Spray) | MIL-STD-202, Method 101, Condition B |
| Vibration | MIL-STD-202, Method 204, Condition D, 20 Gs |
| Shock | MIL-STD-202, Method 213, Condition I, 100 Gs |
| Thermal Shock | MIL-STD-202, Method 107. Cond. B, -40°C to +85°C |
| Moisture Resistance | MIL-STD-202, Method 106, Less Step 7B |
| Barometric Pressure (Altitude) | MIL-STD-202, Method 105, Condition C, 70k Ft. |
| Cable Specification | |
| Center Conductor | Silver plated copper |
| Dielectric | Low Density PTFE |
| Jacket | FEP |
| Jacket Diameter(mm) | 2.20±0.10 |
| Min. Bending Radius(mm) | 11 |
| Shielding Effect(dB) | >90 |
| Weight(kg/km) | 20 (Reference) |
| Cable Attenuation ＠ 20℃ and Sea Level, Power | |
| Frequency (GHz) | Attenuation(dB/m) |
| 0.5 | 0.44 |
| 1 | 0.63 |
| 2 | 0.90 |
| 3 | 1.11 |
| 5 | 1.45 |
| 6 | 1.60 |
| 10 | 2.10 |
| 18 | 2.88 |
| 20 | 3.05 |
| 26.5 | 3.56 |
| 40 | 4.48 |
| 50 | 5.09 |
| 60 | 6.02 |
